Wilmat Scissor Lift Tables

Static Scissor Lift Tables - 2544

• Low Profile Lift Tables achieve a low closed height and usually eliminate the need for a pit.They lift up to around 860mm and also help alleviate bending and twisting often found in industrial environments.
• Tables are controlled by a 24V 'satellite' hydraulic power pack consisting of an Up, Down and Emergency Stop buttons.
• Tables are powered by AC380v/50Hz/3 phase mains.
• Pressure relief valve fitted to protect the hydraulic system.
• Oil less bushing on axle pivots.
• Emergency check valve to ensure slow controlled descent in the event of a hydraulic line failure.
• Removable lifting eyes to facilitate easy handling and installation.
• Tables have fully interlocked descent arrestors should there be an obstruction.
• These tables are manufactured to EN1570:1999 and are IP54 protected.
• Available in two standard capacities 1000Kg & 1500Kg the units have both Full Top and U shape derivatives.

• Lift Tables can be used either at ground level or in a pit.
• They lift up to 1780mm and help alleviate bending and twisting often found in industrial environments.
• Tables are controlled by a 24V 'inbuilt' hydraulic power pack via an Up and Down pendent.
• Tables are powered by AC380v/50Hz/3 phase mains.
• Pressure relief valve fitted to protect the hydraulic system.
• Oilite bushes on axle pivots.
• Emergency check valve to ensure slow controlled descent in the event of a hydraulic line failure.
• Removable lifting eyes to facilitate easy handling and installation.
• Tables have fully interlocked descent arrestors should there be an obstruction.
• These tables are manufactured to EN1570:1999 and are IP54 protected.
• Available ex stock in one standard capacity 2000Kg.
• Other models available on request (1000kg, 4000kg).